What Is The Standard AC Installation Procedure?

What Is The Ideal Height For Installing An Air Conditioner?

For a 1 Ton Air-con, the ideal room size is 10L X 10W X 10H. For the maximum cooling performance in a 10-foot high room, a split-type AC should be positioned at 7 – 8 feet. The optimal height for a window air conditioner is 3-4 feet off the ground. Because heat dissipation is impossible when the AC is mounted near to the wall or in an airtight space, it will trip owing to high head pressure. After AC installation in Lake Dallas, the distance must be greater than 900 mm, and the top of the shaft should not be closed.

Place Selection

• Ensure that the unit is installed in an area with adequate ventilation. Any obstruction obstructing airflow at the air input and air output must be removed from the air conditioner.
• Ensure that the unit is installed in a location that can withstand the device’s weight and vibration.
• Ensure that the item is installed away from heat or vapor.
• Make sure the unit is placed in a location where the cold air may flow evenly across the room.
• Ensure that the device is not exposed to rain or direct sunlight when it is installed. (If exposed to direct sunlight, install a separate sunblind).
• Installing the device in an area where noise or vibration amplification may impact your neighbor is not a good idea.
• Ensure that the device is installed in a location that allows for easy drainage of accumulated water.

How to Install a Window AC?

The ideal way to install a window air conditioner is with two people. Even small air conditioners are cumbersome to move. The last thing you want is for your air conditioner to break and fall out the window or onto the floor. To begin, read the installation manual and become familiar with all of the included hardware and fasteners. A kit with movable window extensions and metal mounting brackets is included with most units. These components will ensure that the window opening is secure and airtight. Consider purchasing a steel support bracket and mounting it to the outside house wall, right below the windowsill, for more support, especially for bigger air conditioners. Raise the lowest sash of the window and center the A/C unit on the windowsill. Because the majority of the weight will be dangling out the window, keep a firm grasp on the unit. Pull the lower sash down until it makes contact with the A/C unit’s top, just under the metal flange that runs across the top. Maintain downward pressure on the lower sash to keep it from toppling out the window. Two little L-shaped metal brackets are usually included in the installation kit to prevent the lower sash from being raised. We can help you in lowering the cost of AC replacement in Lake Dallas. To get the best services in AC installation in Lake Dallas, call us at (940)-600-2997.